Are you looking to set up your own home network using a Cisco router? Look no further! Follow these easy steps to get started:
1. Unbox your Cisco router and plug it into a power source.
2. Connect one end of an Ethernet cable to the router and the other end to your modem.
3. Use another Ethernet cable to connect your computer to one of the LAN ports on the router.
4. Open a web browser and enter "192.168.1.1" in the address bar to access the router's settings page.
5. Enter the default username and password (usually "admin" for both) to log in.
6. Follow the setup wizard to configure your network settings, such as SSID and password.
7. Save your settings and restart the router.
For more detailed instructions, check out Cisco's official support page: [https://www.cisco.com/c/en/us/support/routers](
1. Unbox your Cisco router and plug it into a power source.
2. Connect one end of an Ethernet cable to the router and the other end to your modem.
3. Use another Ethernet cable to connect your computer to one of the LAN ports on the router.
4. Open a web browser and enter "192.168.1.1" in the address bar to access the router's settings page.
5. Enter the default username and password (usually "admin" for both) to log in.
6. Follow the setup wizard to configure your network settings, such as SSID and password.
7. Save your settings and restart the router.
For more detailed instructions, check out Cisco's official support page: [https://www.cisco.com/c/en/us/support/routers](